NIH 3D Prosthetics Models
Generated on: 2025-07-08 08:55:26
Total models: 136
1. Triangular Low-Vision Button
Link: https://3d.nih.gov/entries/3DPX-021686
Description: Triangle button designed to make buttons and switches easier to see and activate. The button is designed to be used with a mono-jack port. The stylus is not included. All instructions for printing ...
2. Task Checker
Link: https://3d.nih.gov/entries/3DPX-021688
Description: Task Manager that allows for tasks to be written down with dry erase markers into a to-do list. Once a task is completed a toggle switch can be slid to reveal a check mark. The task checker can be ...
3. Mouth-Stick Stylus Holder Accessories – for Tablet Mounts
Link: https://3d.nih.gov/entries/3DPX-021690
Description: Accessories for a Mouth-Stick stylus Holder to aid the user in using the tablet. These stylus holder accessories have been designed for the Rehadapt Universal Tablet Holder, however they can be ada...
4. Moose Joystick (JS) Topper
Link: https://3d.nih.gov/entries/3DPX-021691
Description: The Moose Joystick (JS) Topper is a goalpost JS topper intended to be used as an adaptive switch/JS accessory for console and PC gaming. Users need to have some forearm/wrist pronation supina...
5. Hospital Bed Pendant Overlay
Link: https://3d.nih.gov/entries/3DPX-021692
Description: The hospital bed pendant overlay is designed to fit a Hill-Rom P7932B04-REV 01 pendant and may notwork with other brands or models of bed pendants. Snap the overlay onto the Hill-Rom pendant. The f...
6. Kwawu-To-Gripper by Eric Woo-Shem
Link: https://3d.nih.gov/entries/3DPX-021781
Description: A remix by Eric Woo-Shem combining: Kwawu Arm 2.0 - Prosthetic - Socket Version by JacquinBuchanan:Thingiverse: https://www.thingiverse.com/thing:2841281Thai Reach Gripper Thumb with improved pen h...
7. Bike Adaptor- Customizable, Designed by Michele Praga and Alessandro Villa (e-Nable Italia)
Link: https://3d.nih.gov/entries/3DPX-021784
Description: Description:After several iteraction the e-Nable Italia's team composed by Alessandro and Michele has released the first prototype of a hand device called "Bike Adapter".This device was designed to...
8. Equilibras– Upper Limb Assistive Device for Children, Launched by team Gre-nable
Link: https://3d.nih.gov/entries/3DPX-021789
Description: Equilibras is an innovative mechanical assistive device designed to support upper limb movement for children with muscle deficiencies. It is a device designed to assist the arm movements of childre...
9. Knick Prosthetic Finger v 3.5.5
Link: https://3d.nih.gov/entries/3DPX-021880
Description: This model is a simple prosthetic finger for individuals missing a digit.Version 3.5.5, of Knick's prosthetic finger. Find more info at author's site: http://dangercreations.comAssembly instruction...
10. Kwawu Arm 3.0 - Wrap Version By Jacquin Buchanan
Link: https://3d.nih.gov/entries/3DPX-021888
Description: SummaryThe Kwawu 3.0 Wrap Version is a functional, improved prosthetic device designed for individuals with forearm limb differences. Compared to the 2.0 version, this design offers enhanced functi...
11. Prosthetic
Link: https://3d.nih.gov/entries/3DPX-003801
Description: No description available
12. Prosthetic Project
Link: https://3d.nih.gov/entries/3DPX-003802
Description: No description available
13. Prosthetic Wrist
Link: https://3d.nih.gov/entries/3DPX-003803
Description: No description available
14. Limbitless Project
Link: https://3d.nih.gov/entries/3DPX-000501
Description: These files make up the forearm and elbow of the Limbitless Progect. These files were designed and implimented for a young boy, Alex Pring.
15. Flexy-Hand, by Gyrobot Ltd.
Link: https://3d.nih.gov/entries/3DPX-000502
Description: This is not a work imagined, designed, or invented by the UCF Armory. This is an original work by Mr. Steve Wood at Gyrobot Ltd. (http://www.thingiverse.com/thing:242639) Our team simply altered th...
16. Unlimbited Phoenix V2.1 Arm
Link: https://3d.nih.gov/entries/3DPX-020094
Description: This is an upgraded version of the Unlimbited Phoenix V.2 Hand. Meant for individuals living with a total loss of hand but remaining forearm.
17. UnLimbited Phoenix Hand
Link: https://3d.nih.gov/entries/3DPX-020258
Description: UnLimbited Phoenix HandThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wris...
18. Phoenix v2 Hand
Link: https://3d.nih.gov/entries/3DPX-020259
Description: Phoenix v2 Hand This is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist ...
19. e-NABLE Phoenix Hand v3
Link: https://3d.nih.gov/entries/3DPX-020260
Description: e-NABLE Phoenix Hand v3This is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wris...
20. Osprey Hand
Link: https://3d.nih.gov/entries/3DPX-020262
Description: Osprey HandThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent. T...
21. The UnLimbited Arm v2.1
Link: https://3d.nih.gov/entries/3DPX-020264
Description: The UnLimbited Arm v2.1This is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand.The UnLimbited Arm 2.1 is fully para...
22. MotoGripper Terminal Device
Link: https://3d.nih.gov/entries/3DPX-020265
Description: MotoGripper Terminal DeviceThe MotoGripper is a Gripper Thumb hand with a motor. Whereas the original Gripper Thumb Hand presumed that a non-amputated hand would be used to place an object into the...
23. Cyborg Beast
Link: https://3d.nih.gov/entries/3DPX-020267
Description: Cyborg BeastThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent.I...
24. Flexy-Hand 2
Link: https://3d.nih.gov/entries/3DPX-020268
Description: Flexy-Hand 2This is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent.T...
25. Raptor Reloaded
Link: https://3d.nih.gov/entries/3DPX-020269
Description: Raptor ReloadedThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is ben...
26. The Paraglider
Link: https://3d.nih.gov/entries/3DPX-020270
Description: The ParagliderThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent...
27. K1 Hand
Link: https://3d.nih.gov/entries/3DPX-020271
Description: K1 HandThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent. ...
28. Aesthetic Passive Hand
Link: https://3d.nih.gov/entries/3DPX-020272
Description: Aesthetic Passive HandThis device is a remix of the Kwawu Arm 2.0 (Socket Version). This version is the socket version intended for people with short forearm residual limbs.The mechanical hand has ...
29. Talon Hand
Link: https://3d.nih.gov/entries/3DPX-020273
Description: Talon HandThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent.&nb...
30. Ody Hand
Link: https://3d.nih.gov/entries/3DPX-020274
Description: Ody HandThis is a wrist-powered device. To use this design, the user must have a functional wrist and enough palm to push against the device to force the fingers closed when the wrist is bent. ...
31. Forefinger Gripper Hand
Link: https://3d.nih.gov/entries/3DPX-020275
Description: Forefinger Gripper HandThe Forefinger Gripper Hand is a variation on the Snap Talon group of designs. It differs by providing a rigid forefinger in opposition to the elastic closure of the thumb. T...
32. El Medallo Bionic Arm
Link: https://3d.nih.gov/entries/3DPX-020276
Description: El Medallo Bionic ArmEl Medallo is the world's cheapest-to-fabricate open-source bionic prosthetic. Created at eNABLE Medellin, the mechanical design of the device is a variant of the Kwawu Arm (by...
33. Phoenix Reborn Arm
Link: https://3d.nih.gov/entries/3DPX-020277
Description: Phoenix Reborn ArmThis is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand.This design is a Remix of the Phoenix Han...
34. Adjustowrap Gripper Arm
Link: https://3d.nih.gov/entries/3DPX-020278
Description: Adjustowrap Gripper ArmThe Adjustowrap Gripper Arm System is an experimental modular system of upper limb prosthesis components. These components are intended to be compatible with a range of tradi...
35. Flexy Arm
Link: https://3d.nih.gov/entries/3DPX-020281
Description: Flexy ArmThis is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand. The Flexy Arm is an arm design derived from ...
36. Po Arm
Link: https://3d.nih.gov/entries/3DPX-020282
Description: Po ArmThis is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand.This work was inspired by the UnLimbited Arm team's t...
37. Kwawu Arm
Link: https://3d.nih.gov/entries/3DPX-020283
Description: Kwawu ArmThis is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand.This is the second generation of the Kwawu arm. It...
38. Versatile Elbow Operated Gripper - VEOG
Link: https://3d.nih.gov/entries/3DPX-020284
Description: Versatile Elbow Operated Gripper (VEOG) This is an elbow-driven device. To use this design, users must have a functional elbow that bends to force the fingers closed on the hand.Versatile Elbo...
39. Gripper Thumb Terminal Device
Link: https://3d.nih.gov/entries/3DPX-020286
Description: Gripper Thumb Terminal DeviceThe Gripper Thumb TD is an experimental terminal device for upper limb amputees that looks like a passive cosmetic prosthesis, but it performs two-handed tasks without ...
40. Lobster Thumb
Link: https://3d.nih.gov/entries/3DPX-020287
Description: Lobster ThumbThis is a prosthetic thumb designed and supplied for a recipient's request. It is intended for someone missing a complete thumb from either hand but having at least proximal and middle...
41. Frog Arm - Exoskeleton Device
Link: https://3d.nih.gov/entries/3DPX-020289
Description: Frog Arm (Exoskeleton Device)The Frog Arm is an experimental device for people who have some degree of paralysis distal to the elbow. Extending the elbow opens the fingers. This device does nothing...
42. Knick Finger
Link: https://3d.nih.gov/entries/3DPX-020290
Description: Knick FingerThis 3D printable DIY prosthetic finger is ideal for those missing two finger segments, though it can be configured for one knuckle as well. Many options are configurable, so with the r...
43. Bike Handle Adapter
Link: https://3d.nih.gov/entries/3DPX-020291
Description: Bike Handle AdapterSimple adapter to allow for steering a bicycle handlebar more comfortably. It allows for the coupling to "fail" in case of a fall, disconnecting itself from the handle when pushe...
44. Brace Plate
Link: https://3d.nih.gov/entries/3DPX-020292
Description: Brace Plate (NIOP)This brace plate anchors the drive-line for the NIOP Kwawu Remix and Shelbow modules from the NIOP modular arm system. It is recommended that you print the brace plate in PETG, al...
45. HandyLite Adapter
Link: https://3d.nih.gov/entries/3DPX-020293
Description: HandyLite Adapter (NIOP)An adapter to attach the YouBionics Handy or HandyLite bionic hand design to the NIOP Quick-Connect Wrist systemFiles and Resources:NIOP Guide: LinkSTL Files: Link...
46. Helix Cuff
Link: https://3d.nih.gov/entries/3DPX-020294
Description: Helix Cuff (NIOP)This cuff is part of the NIOP prosthetic modular arm catalog, and is used to fit transhumeral (above-elbow) amputees and people with limb difference. The (4) screw holes around the...
47. NIOP Hook
Link: https://3d.nih.gov/entries/3DPX-020295
Description: NIOP HookThe NIOP Hook is a passive device that holds a closed grip with a silicone band but does also have a connection for an optional drive line. It uses the Q-C Wrist.The hook’s unique shape a...
48. Humeral Conductor
Link: https://3d.nih.gov/entries/3DPX-020296
Description: Humeral Conductor (NIOP)This socket system is meant to help leverage the Exo-Shoulder module for recipients with residual limbs too short for the Helix cuff. It consists of a thermoformed socket th...
49. Kickstand Nail Clipper Brace
Link: https://3d.nih.gov/entries/3DPX-020297
Description: Kickstand Nail Clipper Brace (NIOP)The Kickstand nail clipper brace uses a standard Revlon toenail clipper. It works well when set on a leg or a table. Also, the nail file can be slid through the s...
50. Kwawu Bionic
Link: https://3d.nih.gov/entries/3DPX-020299
Description: Kwawu Bionic (NIOP)The Kwawu Bionic hand with Q-C wrist connection is a revolutionary device that aims to redefine the capabilities of prosthetic hands. It combines the best features from the Hinth...
51. Kwawu Hand NIOP Remix
Link: https://3d.nih.gov/entries/3DPX-020300
Description: Kwawu Hand NIOP Remix (NIOP)This is a remix of the Kwawu Arm by Jacquin Buchanan that is compatible with the NIOP modular arm catalog. This module contains a Kwawu hand that uses the standard NIOP ...
52. Kwawu Socket NIOP Remix
Link: https://3d.nih.gov/entries/3DPX-020301
Description: Kwawu Socket NIOP Remix (NIOP)A NIOP-compatible remix of the popular Kwawu Socket version. The hand and wrist pin/connection are separate.Files and Resources:NIOP Guide: LinkInstructions: ...
53. Kwawu Thermoform NIOP Remix
Link: https://3d.nih.gov/entries/3DPX-020303
Description: Kwawu Thermoform NIOP Remix (NIOP)This project converts the Kwawu Thermoform design, so both the Socket and Thermoformed forearms are interchangeable within the NIOP catalog and can use the differe...
54. Moto Gripper with QC
Link: https://3d.nih.gov/entries/3DPX-020304
Description: Moto Gripper with QC (NIOP)This is a modification to the Moto Gripper by Skip Meetze that allows for it to be used the Q-C (Quick Connect) wrist connection system, which allows the wearer to quickl...
55. Quick-Connect Wrist Pin
Link: https://3d.nih.gov/entries/3DPX-020305
Description: Quick-Connect Wrist Pin (NIOP)The Q-C (Quick Connect) wrist connection system will allow the wearer to quickly and conveniently exchange terminal devices from a NIOP arm by simply pressing a releas...
56. Radial Conductor
Link: https://3d.nih.gov/entries/3DPX-020306
Description: Radial Conductor (NIOP)This socket system is meant to help leverage the Kwawu and NIOP socket for recipients with residual limbs too short to use without their forearm popping out of the socke...
57. Salvation Guitar Pick Adapter
Link: https://3d.nih.gov/entries/3DPX-020307
Description: Salvation Guitar Pick Adapter (Version I and II) (NIOP)This is an adapter for individuals who are missing a hand or fingers, to hold a medium thumb style guitar pick securely on their arm. The uniq...
58. Shelbow 2.0
Link: https://3d.nih.gov/entries/3DPX-020308
Description: Shelbow 2.0 (NIOP)The original Shelbow worked out well with beta testing, but the design had small switches and operators on it that were difficult to work with a device hand. Because of this, both...
59. Standard Wrist Pin
Link: https://3d.nih.gov/entries/3DPX-020309
Description: Standard Wrist Pin (NIOP)The standard NIOP Wrist Pin requires very little clean up and snaps into place without fasteners. Once the Wrist Retention Ring and Stopper are added to the wrist connectio...
60. XO-Shoulder
Link: https://3d.nih.gov/entries/3DPX-020310
Description: XO-Shoulder (NIOP)The Exo-Shoulder is an upper arm module to help with recipients that have a working shoulder but have a residual limb too short for the Helix cuff to hold.It is interchangeable wi...
61. XO-Shoulder Robusto
Link: https://3d.nih.gov/entries/3DPX-020311
Description: XO-Shoulder Robusto (NIOP)This is an enhanced and strengthened version of the XO-Shoulder with more room in the cavity of the upper arm of the device.The Basic Exo-Shoulder is an upper arm module t...
62. Boccia Ball Mounting for Wheelchair Users
Link: https://3d.nih.gov/entries/3DPX-020420
Description: The Boccia Ball Mount Assembly is intended for use with the ADA Lap system so that wheelchair users can easily transport balls around with them. All instructions for printing and assembly can be fo...
63. Electric Toothbrush Holder for Universal Cuff
Link: https://3d.nih.gov/entries/3DPX-020421
Description: The Electric Toothbrush Holder for Universal Cuff is intended for people who have difficulty gripping their toothbrush independently. All instructions for printing and assembly can be found in the ...
64. Adapter Plates for Logitech Switches and Loc-Line Mounts
Link: https://3d.nih.gov/entries/3DPX-020422
Description: The Adapter Plates for Logitech Switches and Loc-Line Mounts are intended for use with the Logitech Switch Kit and Loc-Line components to make mounting easy. All instructions for printing and assem...
65. Stylus Palm Grip
Link: https://3d.nih.gov/entries/3DPX-020433
Description: The Stylus Palm Grip is intended for use with individuals who have difficulty gripping a standard stylus independently. The stylus is not included. All instructions for printing and use can be foun...
66. Cosmonaut Stylus Ball End
Link: https://3d.nih.gov/entries/3DPX-020439
Description: The Cosmonaut Stylus Ball End is intended for use with individuals who have difficulty gripping the weighted Cosmonaut stylus independently. The stylus is not included. All instructions for printin...
67. Power Wheelchair Switch Mount
Link: https://3d.nih.gov/entries/3DPX-020445
Description: The Power Wheelchair Switch Mount is intended for use with individuals who need access to a switch on a power wheelchair. The switch is not included. All instructions for printing and use can be fo...
68. Old Spice Deodorant Assembly
Link: https://3d.nih.gov/entries/3DPX-020447
Description: The Old Spice Deodorant Assembly is intended for use with individuals who have difficulty gripping a deodorant stick, applying it, or both. The deodorant is not included. The holder is sized for th...
69. Glucose Test Strip Funnel
Link: https://3d.nih.gov/entries/3DPX-020454
Description: The Glucose Test Strip Funnel is intended for use with individuals who have difficulty accessing the test strips that come in a container. The test strips and test strip container are not included....
70. Honeywell Doorbell Switch Adaptation
Link: https://3d.nih.gov/entries/3DPX-020456
Description: The Honeywell Doorbell Switch Adaptation is intended for use with individuals who need a simple call bell to alert caregivers as needed. The call bell is switch-adapted so that the individual can u...
71. Bowling Ball Mounting Assembly
Link: https://3d.nih.gov/entries/3DPX-020457
Description: The Bowling Ball Mounting Assembly is intended for use with individuals who are bowling while seated in a manual or power wheelchair and have difficulty transporting their ball. The bowling ball is...
72. Quha Bite Switch Adapter
Link: https://3d.nih.gov/entries/3DPX-020479
Description: The Quha Bite Switch Adapter is intended for use with individuals who have difficulty gripping and moving a standard mouse independently using the Glassouse bite switch. The Quha Bluetooth mouse an...
73. One-Sided Goalpost Joystick Handle
Link: https://3d.nih.gov/entries/3DPX-020494
Description: The One-Sided Goalpost Joystick Handle is intended for use with individuals who would benefit from a power wheelchair joystick handle that is supportive on one side but accessible from the other si...
74. Wheel Lock Handle Extension
Link: https://3d.nih.gov/entries/3DPX-020497
Description: The Wheel Lock Handle Extension is intended for use with individuals who would benefit from a non-rigid, larger wheel lock handle. For individuals with low vision, printing the device using a brigh...
75. ModularHose Flat Surface Mount Anti-Rotation Insert
Link: https://3d.nih.gov/entries/3DPX-020498
Description: The ModularHose Flat Surface Mount Anti-Rotation Insert is intended for use with the Loc-Line components in the Permobil wheelchair rail. It prevents rotation of the flat surface mount component fo...
76. Elbow Pad Gaming Switch Mount
Link: https://3d.nih.gov/entries/3DPX-020499
Description: Mount designed to go over the elbow pad of a wheelchair for adaptive game playing for individuals without fine motor movement. This mount was designed for and tested using Buddy Button on Logitech ...
77. Gaming Thumbstick Adaptive Toppers
Link: https://3d.nih.gov/entries/3DPX-020500
Description: The Gaming Thumbstick Adaptive Toppers are intended for use with the PlayStation 4 Dualshock 4 Wireless Controller. One or more of these toppers may be beneficial for individuals with impaired fine...
78. RAM Double Socket Arm T-Knob Extension
Link: https://3d.nih.gov/entries/3DPX-020541
Description: The RAM Double Socket Arm T-Knob extension is designed to interface with the RAM-B-2-1 T-Knob that is installed on RAM B-size Double Socket Arms. It will extend the T-Knob for greater reach and hol...
79. Switch Mount for Piko Switch
Link: https://3d.nih.gov/entries/3DPX-020542
Description: The Switch Mount for Piko Switch is designed to interface with a 30 mm PikoButton. The PikoButton may be easily pressed with the thumb after wrapping the fingers around the Switch Mount. All instru...
80. RAM to Loc-Line Adapter
Link: https://3d.nih.gov/entries/3DPX-020543
Description: The RAM to Loc-Line Adapter is designed to interface with any B size RAM Double Socket Arm at one end and any Loc-Line 3/4" ID component at the other end making the two components compatible. All i...
81. Microsoft Adaptive Hub Dycem Top JS Topper
Link: https://3d.nih.gov/entries/3DPX-020544
Description: The Microsoft Adaptive Hub Dycem Top Joystick Topper is designed to interface with the base of the Microsoft Adaptive Hub Joystick Button. This allows for easier use of the joystick for individuals...
82. Sponge Wand Hand Stirrup
Link: https://3d.nih.gov/entries/3DPX-020762
Description: The Sponge Wand Hand Stirrup is intended for use with individuals who require extra assistance with stabilizing and maneuvering the sponge wand. The sponge wand is not included. All instructions fo...
83. SmartDrive Dial Armrest Mount
Link: https://3d.nih.gov/entries/3DPX-020777
Description: The SmartDrive Dial Armrest Mount is intended for use with a manual wheelchair and the SmartDrive system to mount the Dial control in an easier to access location. All instructions for printing and...
84. Braun Series 7 Electric Razor UCuff holder
Link: https://3d.nih.gov/entries/3DPX-020778
Description: The Braun Series 7 Electric Razor U Cuff holder is intended for use with the Braun Series 7 electric razor and a universal cuff to allow for use by individuals who have difficulty gripping a electr...
85. Wishbone Joystick Handle
Link: https://3d.nih.gov/entries/3DPX-020779
Description: The Wishbone Joystick Handle is designed to interface with the joystick shafts on Permobil wheelchairs or any joystick shaft with appropriate dimensions, such as that of the Traxsys Roller II Joyst...
86. Writing Splints
Link: https://3d.nih.gov/entries/3DPX-020780
Description: These devices have been designed for patients who need a writing splint to help with grip and stability. There are 4 different iterations of the splint available. Please read each PDF instruction d...
87. Magitek Eyeglasses Mount
Link: https://3d.nih.gov/entries/3DPX-020781
Description: The Magitek Eyeglasses Mount is intended for use with individuals who control their power wheelchair using Magitek's alternative drive control system and wear eyeglasses. All instructions for print...
88. Luke Arm IMU Clip for Shoelaces
Link: https://3d.nih.gov/entries/3DPX-020782
Description: The Luke Arm IMU Clip for Shoelaces is intended for use with individuals who control their Luke Arm with the IMU foot control method. Luke Arm components are not included. All instructions for prin...
89. Ustep Walker Cue Module Case
Link: https://3d.nih.gov/entries/3DPX-020783
Description: The Ustep Walker Cue Module Case is intended for individuals who use a Dolomite Legacy Walker but require the UStep Laser & Sound Cueing Module to independently ambulate. The UStep Laser & ...
90. ModularHose Phone Mount Knob Adapter
Link: https://3d.nih.gov/entries/3DPX-020784
Description: The ModularHose Phone Mount Knob Adapter is intended for use with individuals who use the phone mount offered by ModularHose and have difficulty turning the cylindrical knob for adjusting the clamp...
91. Palm Grip Typing Aid
Link: https://3d.nih.gov/entries/3DPX-020785
Description: The Palm Grip Typing Aid is intended for use with individuals who have difficulty tapping the keys on a keyboard independently. All instructions for printing and use can be found in the "PalmGripTy...
92. Conductive Palm Grip Typing Aid
Link: https://3d.nih.gov/entries/3DPX-020786
Description: The Conductive Palm Grip Typing Aid is intended for use with individuals who have difficulty tapping on a touchscreen or gripping a standard stylus independently. All instructions for printing and ...
93. Adaptive Head/Mouth Stick Screw Adaptor for Holding Wide Markers, Wood Burner, or Other Tools
Link: https://3d.nih.gov/entries/3DPX-021110
Description: This is a 3D model optimized for 3D Printing for use with adaptive equipment like a head stick or a mouth stick. This model was derived from measurements taken from an acrylic rod used in a head st...
94. Drive Manual Wheelchair Mount and Cupholder
Link: https://3d.nih.gov/entries/3DPX-021166
Description: The mount is intended for Drive QRT manual wheelchairs using existing screws on the armrest to fasten a cupholder. All instructions for printing and use can be found in the "Drive_MWC_Cupholde...
95. Rehadapt to Lockline Flat Surface Mount
Link: https://3d.nih.gov/entries/3DPX-021419
Description: This flat surface mount is used as an alternative mounting option to go from Rehadapt to Locline components. This mount will also work with other products that have a flat mounting surface; allowin...
96. Prosthesis Quick Change Coupler
Link: https://3d.nih.gov/entries/3DPX-001691
Description: [WIP] A coupler designed to allow for the quick replacement of prosthetic attachments. Designed by Duck and Cover Robotics for the Innovation Creation Make-a-Thon.
97. Makeup Application Assist Glove (MAAG)
Link: https://3d.nih.gov/entries/3DPX-001694
Description: Finger Cap and Wrist Pressure Cuff for Makeup Application Assist Glove
98. Lower Extremity Prosthesis Quick Connect/Disconnect Coupler
Link: https://3d.nih.gov/entries/3DPX-001696
Description: A simple 3-piece coupler that can allow a lower body prosthesis to be removed and replaced within minutes, without having to switch sockets and/or full prosthetic legs.
99. Facial prosthesis
Link: https://3d.nih.gov/entries/3DPX-016997
Description: The authors of the realized 3D model are: Rodrigo Salazar-Gamarra and collaborators.
100. Tremor Reduction Hand Brace
Link: https://3d.nih.gov/entries/3DPX-001700
Description: Hand brace that dampens the effects of tremors.
101. Dispositivo que facilita la apertura de puertas con pomos redondos a personas con prótesis de miembro superior
Link: https://3d.nih.gov/entries/3DPX-017030
Description: This device is designed so that people with bilateral upper limb amputations can open doors with round knobs with their prostheses. It is used for any type of upper limb prosthesis and is suitable ...
102. The K1 Hand by Evan Keuster
Link: https://3d.nih.gov/entries/3DPX-001705
Description: An elegant, anthropomorphic hand that utilizes commonly available materials and 3D Printing. There is no metal hardware and all cords are recessed for aesthetic purposes and for a better quality us...
103. High friction Socket
Link: https://3d.nih.gov/entries/3DPX-001706
Description: Reducing shear stresses within the socket
104. LWM Low Profile Below Knee Prosthetic Quick Connect
Link: https://3d.nih.gov/entries/3DPX-001708
Description: This is a socket side low profile quick connect for below the knee prosthetic.
105. Scapular Actuator For Mechanical Cable-driven Prosthetics
Link: https://3d.nih.gov/entries/3DPX-001709
Description: This is an open-source version of a figure 8 "butterfly" harness. Hunching the shoulders forward pulls the cable inside a tube, which actuates a mechanical device.
106. Unlimbited Phoenix V2 Hand
Link: https://3d.nih.gov/entries/3DPX-017098
Description: 3D prtined prosthetic hand and wrist device
107. Motorcycle Adapter-Prosthetic Hand Attachment
Link: https://3d.nih.gov/entries/3DPX-001710
Description: No description available
108. Talon Hand 2.x
Link: https://3d.nih.gov/entries/3DPX-000992
Description: InstructionsYou can print everything but the finger distals with no support. Ivan Owen has published an excellent step-by-step tutorial, in 3 parts:https://www.youtube.com/watch?v=Ii_OYzhCcJg&...
109. Wide Palm Talon Hand
Link: https://3d.nih.gov/entries/3DPX-000993
Description: No description available
110. Talon Flextensor 1.0
Link: https://3d.nih.gov/entries/3DPX-000995
Description: This is intended as replacement fingers for a person with a wrist and palm, but no digits, most commonly the congenital amputation Amniotic Banding Syndrome (ABS). It lacks the elastics common to t...
111. Raptor Hand
Link: https://3d.nih.gov/entries/3DPX-000996
Description: The objectives in designing the Raptor Hand were as follows: * To simplify fabrication and assembly and repair for makers and recipients alike * To provide a platfo...
112. Raptor Reloaded
Link: https://3d.nih.gov/entries/3DPX-000997
Description: The Raptor Reloaded is an updated release of the original that incorporates feedback from the e-NABLE community and has CAD design source files available in STEP, IGES, IPT, and F3D formats. Update...
113. Printed Flat Raptor Reloaded Gauntlet
Link: https://3d.nih.gov/entries/3DPX-000998
Description: This first iteration of a printed flat, then thermoformed Raptor Reloaded Gauntlet has not been tested yet, but I wanted to get the concept out so others can be playing with the design too. Th...
114. Raptor Reloaded Adaptor v1.0 left 100%
Link: https://3d.nih.gov/entries/3DPX-000999
Description: This is a test design that has not been printed yet. I’m away from home for the holidays, so I’m looking for e-NABLE volunteers to print it and give me feedback. It will work like it’s predecessors...
115. Mercury Quick Change Prosthetics Coupler
Link: https://3d.nih.gov/entries/3DPX-001959
Description: The design consists of three main units; an adapter that mates to the socket of residual limb, an adapter that connects to the extremity assembly, and nut that draws the two adapters together...
116. Electric Toothbrush Holder for Universal Cuff
Link: https://3d.nih.gov/entries/3DPX-020035
Description: This product was developed for individuals who have lost upper extremity fine motor function and wish to independently brush their teeth. The holder has an adjustable strap that can fit a majority ...
117. Northern Project: A Yale Assistive Innovation and Design Assistive Eating Device for Individuals with Duchenne Muscular Dystrophy
Link: https://3d.nih.gov/entries/3DPX-021677
Description: A Yale Assistive Innovation and Design (YAID)-original design, this product allows individuals with Duchenne Muscular Dystrophy to eat food independently. The product is controlled by a button syst...
118. Skull and plate ready to print
Link: https://3d.nih.gov/entries/3DPX-014280
Description: This is a model of a skull with a defect and a customized implant, ready to print, for educational purposes.
119. Raptor Hand with enlarged thumb opening
Link: https://3d.nih.gov/entries/3DPX-001000
Description: Customized Raptor Hand has an enlarged opening for the thumb (for a prosthesis recipient with missing fingers but a working thumb). An e-NABLE Volunteer has a prosthetic hand recipient with missing...
120. Adaptive Grip Mechanism for Prosthetic Hand
Link: https://3d.nih.gov/entries/3DPX-001001
Description: Most of the 3D-printed prosthetic hands have adjustable tensioners that tune the tendons to each finger so that the all work together as the wrist flexes and pulls on the tendon cords. This grip is...
121. Raptor Adaptor v1.0
Link: https://3d.nih.gov/entries/3DPX-001002
Description: The Raptor Adaptor v1.0 is a modular interface that connects The Raptor Hand by e-NABLE (a prosthetic hand) and the RIT Arm (a prosthetic arm). The Raptor Adaptor v1.0 is the first step by the e-NA...
122. Ody Hand
Link: https://3d.nih.gov/entries/3DPX-001010
Description: This hand is for our friend Odysseus, who lives in Greece. It is intended to be a starter hand for children with no fingers, a small palm and a short range of motion. I decided on two fingers and a...
123. Gauntlet for Cyborg Beast
Link: https://3d.nih.gov/entries/3DPX-001011
Description: I made this gauntlet in response to Jorge's Cyborg Beast Gauntlet, as the angular inside shape was not super comfortable for Shea. I'm also wondering if having two sets of straps and longer length ...
124. Voronoi Gauntlet
Link: https://3d.nih.gov/entries/3DPX-001012
Description: Here is a voronoi Gauntlet and hex pins for a 3D printed Gauntlet. This was created using Grasshopper in Rhino.
125. Shea's Gauntlet (for Cyborg Beast)
Link: https://3d.nih.gov/entries/3DPX-001013
Description: This is a derivative of Karuna's short gauntlet, but 3D stars were added to suit the stylish tastes of Shea. This gauntlet is used with Jorge Zuniga's awesome Cyborg Beast palm section and fingers.
126. Short Gauntlet (Karuna's Cyborg Beast Gauntlet)
Link: https://3d.nih.gov/entries/3DPX-001014
Description: This is a short version of the Cyborg Beast Gauntlets that I have been experimenting with. I made this design considerably more robust as Karuna (the young boy this was made for) has a small arm an...
127. Gauntlet v2 (for Cyborg Beast)
Link: https://3d.nih.gov/entries/3DPX-001016
Description: This is a remix of the first gauntlet that I designed to use with the Cyborg Beast. I found that I needed to reinforce version 1 when I scaled the print down to a smaller size. The velcro also put ...
128. Shea's Viola Bow Holder
Link: https://3d.nih.gov/entries/3DPX-001017
Description: This is a viola bow holder that was created for Shea. Shea was born without fingers on her right hand but she wanted to be able to play her viola. This gauntlet allows her to hold the bow. This was...
129. Slotted Palm for 3D-printed hand
Link: https://3d.nih.gov/entries/3DPX-001018
Description: This is a slotted palm created so that velcro can be threaded through the slots. This was just a test. Use at your own risk. Just posting to share with anyone interested in taking this to the next ...
130. Static Prosthetic or Teaching Hand
Link: https://3d.nih.gov/entries/3DPX-001615
Description: Prosthetic or Teaching Hand
131. Cyborg Beast (Original Design)
Link: https://3d.nih.gov/entries/3DPX-000524
Description: Statement The Creighton University Research Group has made the Cyborg Beast files available for research and personal use. Our intention is to make this device accessible to everyone independent of...
132. RIT e-NABLE Arm v0.43
Link: https://3d.nih.gov/entries/3DPX-000679
Description: The Derek Arm is an elbow-actuated variant of an RIT-developed e-NABLE prosthesis designed to fit Derek, the first user of our arm. As illustrated below, in the video, bending the elbow causes the ...
133. Retopologize testing for Cyborg Beast v1.3
Link: https://3d.nih.gov/entries/3DPX-000682
Description: Left palm retopologize test for Cyborg Beast v1.3 Blender file included in downloads
134. Adjustable Stiffness Ankle Foot Orthosis
Link: https://3d.nih.gov/entries/3DPX-008072
Description: University of Washington Ability & Innovation Lab (https://depts.washington.edu/uwsteele/)This is an example of an adjustable stiffness ankle foot orthosis (AFO) which can be tuned with differe...
135. Kinetic Hand by Mat Botwell
Link: https://3d.nih.gov/entries/3DPX-022002
Description: Please see the zip packages for detailed components of the model, do not directly print the preview fileThe Kinetic Hand is a body-powered, 3D-printed prosthetic device designed for individuals...
136. Kwawu Arm 3.0 - Socket Version- by Jacquin Buchanan
Link: https://3d.nih.gov/entries/3DPX-022012
Description: Kwawu Arm 3.0- Socket Version is a customizable 3D-printed prosthetic arm designed by Jacquin Buchanan for individuals with short forearm residual limbs. This version offers enhanced grip strength,...